Jig Machine/Saw-tooth Wave Jig Machine

Jig machine (2)

Gold jig machine description：

Our Saw-tooth Wave Jig Machine is a new type of energy saving and high efficient gravity separation equipment and developed based on the traditional Sine Wave Jig Machine.

Product name: jig machine.

Application:For separation placer gold/alluvial gold, tungsten,iron, tin, hematite, copper, tantalum niobium, titanium, manganese, barite, zirconium, chrome and gemstone/diamond ,fluorite etc. etc heavy minerals.

Feeding size:0-20mm.

Capacity: 20tons per hour one set

jig machine manufacturer

Saw tooth wave jig is one of the modern gravity separator mining equipment machinary, because its big capacity, wide separation size range, simple operation and maintenance, jig machine as a rough separator is widely used in the separation of place gold, tin, titanium, iron ore, manganese ore, barite,diamond,chrome,tungsten etc.

The traditional jig is mostly driven by circumferential eccentricity, and its jig pulsation curve is mostly sinusoidal. Because the rising and falling water velocity and action time generated by diaphragm movement are basically the same, it is not conducive to the loosening of jig bed layer and the stratification of ore particles according to specific gravity, so affecting the separation ratio and recovery rate of equipment.

Sawtooth wave jig is an energy-saving gravity separator mineral separator equipment developed and improved on the basis of traditional jig according to the theoretical stratification law of jig bed layer. Its jigging pulsation curve is zigzag, which makes the rising flow faster than the falling flow: the rising time is short and the falling time is long; It overcomes the defects of sinusoidal wave and pulsating curve jig in rising and falling water flow and the same action time, enhances the looseness of the bed, alleviates the inhalation effect, makes the heavy ore particles in the minerals fully settle, and greatly improves the separation ratio capacity and recovery rate of the equipment. Compared with sinusoidal jig, Sn 3.01%, W 5.5%, Pb 1.63%, Zn 2.04%; The water consumption is reduced by 30%-40%, the floor area is reduced by 1/3, and the stroke can be adjusted, because the electromagnetic adjustment motor is used for stepless adjustment of the stroke. Its performance has reached the domestic advanced level and it is one of the ideal energy-saving gravity separator equipment.

gold jig concentrator

Jig machine working principle/How does jig machine work?

Jig separator as gravity separator,no need any chemical,just use water for washing.use iron ore as bed stone as seperation medium.heavy mineral will through iron ore through screen as concentrate,light mineral will flow to tailing discharge.

feeding ore from feeding box, the ore granules will move in the vertical alternative water-flows. Layers will be formed because of density difference of materials. The minerals with small density will be in the up layer and will flow together with the up pulp flow while material with bigger density will be in the down layer and will discharged from the down discharging port as jigging concentrate.

750 750

Saw-tooth Wave Jig Machine Feature

◆ High capacity

◆ High concentration ratio and high recovery

◆ Fabricated with highest quality material

◆ Easy to install, operate and maintain

◆ The pulsation curve is saw-tooth wave shape facilitate heavy mineral to settling

◆ Saving water 30-40% than ordinary jig

◆ The pulsation speed very easy adjusted by regulator

◆ Suitable for roughing and cleaning

◆ Can achieve a good result in processing such as placer gold, tungsten,iron, tin, hematite, copper, tantalum-niobium, titanium, manganese, barite, zirconium, chrome and gemstone/diamond,fluorite etc.

jig separator

Jig machine mining equipment technical Specification

1. Hutch

2. Rubber diaphragm

3. Cone

4. Electromagnetism speed governor

5. Cam case

6. Flange of make-up water pipe

7. Screen

8. Feeding tank

Construction drawing of JT2-2 Saw-tooth Wave Jig

Saw tooth Jig machine

Model	Hutch		Diaphragm		Feeding Size (mm)	Amount of make-up water (m³/t)	Make-up water pressure (Mpa)	Capacity (t/h)	Power (kw)	Dimensions (mm)	Weight (Kg)
Model	Shape	Area (m²)	Stroke (mm)	Frequency of Stroke (r/min)	Feeding Size (mm)	Amount of make-up water (m³/t)	Make-up water pressure (Mpa)	Capacity (t/h)	Power (kw)	Dimensions (mm)	Weight (Kg)
JT3-1	Trapezoid	3	12-30	50-125	<10	3-6	≥0.05	7.5-15	5.5	2745×2000×3030	3085
JT4-2	Rectangle	5	25-57		<25	4-8	8-20	7.5		4240×1990×2750	3098
JT4-2S	Rectangle	5	25-57		<25	4-8	8-20	5.5×2		4240×1990×2750	3500
JT5-2	Trapezoid	4.86	12-30		<10	3-6	12-25	7.5		3600×2000×2600	4500

Diamond jig machine Application:

It is widely used to separator tungsten, tin, gold, red iron, brown iron, manganese, titanium, antimony, lead, tantalum, niobium and fluorite other heavy minerals in coarse particle size.
There are many applications where the jig separator of particular value and cannot be equaled for economical and efficient performance. They are effective in processing precious and base metal, rare metal and non-metallic minerals.